Feedback
首页    Receiver    CROSSOVER-RX XR401-A(AFHDS-2A FLYSKY) SBUS/FPORT/RSSI UltramicroFPVRX

CROSSOVER-RX XR401-A(AFHDS-2A FLYSKY) SBUS/FPORT/RSSI UltramicroFPVRX

XR401-A is totally new designed receiver, which has a multifunctional UART port(DMA operation) for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with FLYSKY . AFHDS-2A
$ 15.99
Add to cart
QTY:
  • XR401-XR401-A-图片7

    XR401-A is totally new designed receiver, which has a multifunctional UART portDMA operation for double and two-way communication, it can outpu SBUS and FPORT signal at the same time, also support RSSI output and online firmware updating. It is 100% compatible with FLYSKY . AFHDS-2A

    PRODUCT SPECIFICATIONS

    Type: CROSSOVER RX XR401-A(AFHDS-2A FLYSKY) SBUS/FPORT/RSSI UltramicroFPVRX

    Modulation: Compatible FLYSKY AFHDS-2A

    Num of Channels: 14CH

    Size: 10*13*2mm (without antenna)

    RC Data output: SBUS(REV) & FPORT(NOR)

    Supports digital RSSI output;

    Variable RF Link;

    High speed(7.7ms);

    Weight: 0.45g

    Voltage: 5.0V

    Effective distance: >300m

    Antenna Length:31mm

     

    Connection Diagram(Choose SBUS or FPORT):

    XR401-XR401-A-图片8

    How to Bind:

    1. Power ON receiver;
    2. It will enter binding mode after 15s (slow flashing LED turns to fast blinking);
    3. Bind to Radio(according to your radio manual)-Done(red LED constant bright)!

     

    Antenna:

        Different with other antenna, the antenna on XR400 series receivers can be arbitrarily bended but no worry for damage or fallen off, so it would be no problem if it were installed in a limited confined place.

     

     

    Variable RF Link technology:

    Variable RF Link technology:  When the receiver is too close to radio(remote control), normally RF signal will be blocked and meanwhile lose control happens, Variable RF Link is born for solving the problem! As soon as Variable RF Link finds that the receiver is coming close to radio, it will adjust LNA gain and PA output power lower to avoid short distance control failure automatically;  When Variable RF Link detects that the receiver is going far away from radio, it will adjust LNA gain and PA output power higher to increase RX’s working range automatically.

     

    DECLARATION

    1The XR600T series RX are Not a copy or fake products of other companies

    2MXO-RF and CROSSOVER-RX brand guaranteed its high quality and continuous technical service.

    • Model
      XR401-A

Products Recommended