首页    Receiver    Protocol    FRSKY    CROSSOVER-RX Ma-RX62HE-F1(FRSKY-D8) Built-in brushless ESC/7CH MicroRX

CROSSOVER-RX Ma-RX62HE-F1(FRSKY-D8) Built-in brushless ESC/7CH MicroRX

2)super small size:24.0*16.0*6.5mm( not including antenna
3)super light:1.85g(not including power cables and motor connectors) 
4)working voltage:7.4~11.1V
5)Comes with a built-in 7A/2S or 5A/3S brushless ESC
6)Built-in DCDC buck circuit(2.2A/3.9V)
7)Supports double aileron mode(reversed)
8)Auto binding
9)1.0mm 3P servo connectors
$ 26.99
Add to cart
  • CROSSOVER-RX Ma-RX62HE-F1(FRSKY-D8) Built-in brushless ESC/7CH MicroRX

    Ma-RX62HE-F1 series receivers were developed upon Ma-RX42E-X series receivers, with a built-in 7A/2S(5A/3S) brushless ESC and 6 independent servo ports on board, in this case, Ma-RX62HE-F1 receiver can provide more power and more channels to work on larger size or more complicated model planes.


    2)super small size24.0*16.0*6.5mm( not including antenna
    3)super light1.85g(not including power cables and motor connectors)
    4)working voltage:7.4~11.1V
    5)Comes with a built-in 7A/2S or 5A/3S brushless ESC
    6)Built-in DCDC buck circuit(2.2A/3.9V)
    7)Supports double aileron mode(reversed)
    8)Auto binding
    9)1.0mm 3P servo connectors

    Basic version

    3)Built-in brushless ESC(7A/2S or 5A/3S):Yes
    4)TELEM function:No

    Connection Diagram

    Auto binding

    As it is difficult to reach the binding button when the receiver has been installed inside the plane, we developed self-binding function, it works like this: The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing), then complete the binding operation according to your transmitter binding manual.

    Double ailerons mode

    Double-aileron mode is developed for those model airplanes using double ailerons. This function can simplify servo wiring connection and transmitter set up. Default is double-aileron mode, you can turn off double-aileron mode by short connect P ports on the above picture, then AIL2 will be set as AUX2 output.

    TELEM function

    TELEM function is useful on monitoring battery voltage, receiver working voltage and its signal strength as well as its working temperature in real time, through which customer can get working state of receiver and battery discharging state under control, so flying out of control range and over discharging will rarely happen ( for brushless motor rotation speed or flight height monitoring, customer needs to choose a more advanced receiver)

    NOTE: The effective control range of TELEM function depends on transmitter, it is possible that this would happen: the working range of the receiver is far more than TELEM function effective range, it is normal and alright!

    MA-RX42-X series receivers have the following 8 versions


    All items will be checked carefully before shipment.We will pack and ship the parcel with 5 day. ( There will be delay when holidays. )

    Tracking information is available within 1-4 days after shipment. We will ship the parcel via China Post or Aliexpress. Usually, shipping time is 15-60 business days. If you can't receive your item, please feel free to contact me for help.

    Service Time

        Beijing: From 9:00 am to 18:00 pm

        London: From 2:00 am to 11:00 pm

        Moscow: From 4:00 pm to 13:00 pm

    New York: From 21:00 pm to 6:00 am


        If you are not satisfied with the items, please feel free to contact me for solution instead of leaving neutral or negative feedback, We will try our best to solve the problem.

    Please leave positive feedback and 5 stars if you are satisfied with our items and services.  :) Thank you


    1)The Ma-RX62HE series RX are Not a copy or fake products of other companies;

    2)MXO-RF and CROSSOVER-RX brand guaranteed its high quality and continuous technical service.

Products Recommended